• Stage Image 0
    Menu
  • Stage Image 1
    User manuals How to use the Chrono Functions
  • Stage Image 2
    User manuals Hands readjustment
  • Stage Image 3
    User manuals How to set the time, day and date

Find your manual

Step 1: What functions are you looking for?

 

Reselect
  • Day/Date Settings
  • Time Settings
  • Chronograph Settings
  • Readjustment
  • Battery Change
  • Additional functions

Step 2: What watch type is it?

 

Reselect
  • Standard
  • Swatch Touch
  • Swatch Touch
  • Standard
  • Touch/Fun
  • Standard
  • Retrograde
  • Chrono Automatic
  • Swatch Touch
  • Standard
  • Retrograde
  • Chrono Medium
  • Skin Chrono
  • Touch / Fun
  • Standard
  • Skin
  • Touch / Fun
  • Swatch Touch
  • Loomi
  • Loomi Touch
  • Pop
  • Scuba
  • Alarm
  • Swatch Touch

Step 3: Choose individual function

 

Reselect
  • Timing Mode
  • Add Function
  • Tachymeter
  • Split Time
  • Timing Mode
  • Add Function
  • Tachymeter
  • Split Time
  • Timing Mode
  • Add Function
  • Tachymeter
  • Alarm
  • Alarm
  • Beep
  • Timer

CURRENT MANUAL: Chronograph Settings | Standard | Split Time

Split Time

Press…

1. The upper push-button to start the chronograph.

2. The lower push-button to read the intermediary time.

3. Once again to continue (repeat the last two actions as many times as you wish to read the intermediary time while the chrono carries on).

4. The upper push-button to stop finally.

5. The lower push-button to reset.

PRINT THIS PAGE

CURRENT MANUAL: Time Settings | Standard

Time Settings

A: Normal position of the crown

C: Position for setting the time

To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.

PRINT THIS PAGE

CURRENT MANUAL: Battery Change | Skin

Battery Change

Open carefully the battery cover with a thin screwdriver. Press the battery and cover unit from underneath firmly back to the watch case.

PRINT THIS PAGE

CURRENT MANUAL: Readjustment | Retrograde

Readjustment

Adjusting the chronograph (e.g.: after battery change or a hard shock)

1. Pull the crown to position B.

2. Press the lower button to reach the position 0 with the hand of the minutes counter.

3. Pull the crown to the position C.

4. Press the upper button to reach the position 3h00 with the hand of the seconds counter.

5. Press the lower button to reach the position 0 with the hand of the 1/2 min. counter.

6. Press the crown to position A.

PRINT THIS PAGE

CURRENT MANUAL: Battery Change | Standard

Standard

Important:

When replacing the battery, be carful not to damage the (+) terminal which is on the side. The (-) terminal is at the bottom.

PRINT THIS PAGE

CURRENT MANUAL: Readjustment | Skin Chrono

Readjustment

Adjusting the chronograph (e.g.: after battery change or a hard shock):

Press…

1. Simultaneously P1 + P2 until A, B and C complete the cycle.

2. P2. A completes a whole cycle.

3. P1 to align A.

4. P2 again, and B completes a whole cycle.

5. P1 to align B.

6. P2 again, and C completes a whole cycle.

7. P1 to align C.

8. Simultaneously P1 + P2 again, to complete the readjustment process. The watch will acknowledge this procedure with a revolution on all displays. If P1 + P2 are not pressed within 5 seconds, the watch will carry out the acknowledgement function automatically.

 

 

PRINT THIS PAGE

CURRENT MANUAL: Additional functions | Loomi

Loomi

Light Function

PRINT THIS PAGE

CURRENT MANUAL: Chronograph Settings | Retrograde | Timing Mode

Timing Mode

Press…

1. The upper push-button to start the chronograph.

2. Once again to read the elapsed time.

3. The lower push-button to reset.

Retrograde: the duration of timing is limited to 2 hours.

PRINT THIS PAGE

CURRENT MANUAL: Readjustment | Standard

Readjustment

Adjusting the chronograph (e.g.: after battery change or a hard shock)

1. Pull the crown to position B.

2. Press the upper button to reach the position 12h00 with the hand of the 1/10 sec. counter.

3. Pull the lower button to reach the position 12h00 with the hand of the seconds.

4. Pull the crown to the position C.

5. Press the upper button to reach the position 12h00 with the hand of the minutes counters.

6. Press the crown to position A.

PRINT THIS PAGE

CURRENT MANUAL: Additional functions | Loomi Touch

Additional Functions

Touch your Swatch.

Loomi on.

PRINT THIS PAGE

CURRENT MANUAL: Day/Date Settings | Standard

Day/Date Settings

To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.

PRINT THIS PAGE

CURRENT MANUAL: Chronograph Settings | Retrograde | Tachymeter

Tachymeter

Measure the speed Base 100 or 1000 m.

Press...

1. The upper push-button when an action starts.

2. Once again to stop after a distance of 100 or 1000 m. Read the speed indicated by the 60 seconds counter (Retrograde: 30 sec.) on the tachymeter scale (km/h = kph).

3. The lower push-button to reset.

PRINT THIS PAGE

CURRENT MANUAL: Additional functions | Pop

Additional Functions

Note: Wear your Swatch simply with its band or try "popping" it directly onto your clothes.

PRINT THIS PAGE

CURRENT MANUAL: Additional functions | Scuba

Additional Functions

Using the adjustment ring

For setting the start time and duration of an activity. Line up the marker on the adjustment ring with the minute hand. Timing starts at the time indicated by the marker. The elapsed time is indicated by the minute hand pointing the number on the adjustement ring.

IMPORTANT: After being submerged in salt water, the Scuba 200 Chrono should always be rinsed with fresh water.

CAUTION: The Irony Scuba 200 Chrono is not a professional diving watch.

PRINT THIS PAGE

CURRENT MANUAL: Chronograph Settings | Standard | Add Function

Add Function

Press…

1. The upper push-button to start.

2. Press the upper push-button to read the first time.

3. Press the upper push-button to restart the chronograph.

4. Press the upper push-button to read the additional time (repeat these two steps as many time as you wish).

5. Press the lower push-button to reset.

PRINT THIS PAGE

CURRENT MANUAL: Readjustment | Touch / Fun

Readjustment

Test and inilisation

Push crown for 5 secs. If both hands go to 12 o’clock, test is ok. Push crown again and hands go back to time.

If hands are not exactly at 12 o’clock, pull crown to position 2. Turn clockwise to readjust hour hand. Turn counterclockwise to readjust minute hand. Push crown back and hands turn back to show time.

PRINT THIS PAGE

CURRENT MANUAL: Chronograph Settings | Standard | Tachymeter

Tachymeter

Measure the speed Base 100 or 1000 m.

Press...

1. The upper push-button when an action starts.

2. Once again to stop after a distance of 100 or 1000 m. Read the speed indicated by the 60 seconds counter (Retrograde: 30 sec.) on the tachymeter scale (km/h = kph).

3. The lower push-button to reset.

 

 

PRINT THIS PAGE

CURRENT MANUAL: Battery Change | Touch / Fun

Battery Change

1. Open carefully the plastic cover with a thin screwdriver.

2. Replace the battery, plus (+) side up.

3. Press the plastic cover firmly back on its position (small click).

Note: Check carefully that the rubber gasket its on correct position and is not harmed.

 

PRINT THIS PAGE

CURRENT MANUAL: Chronograph Settings | Chrono Automatic | Timing Mode

Timing Mode

Press…

1. The upper push-button to start the chronograph.

2. Once again to read the elapsed time.

3. The lower push-button to reset.

 

PRINT THIS PAGE

CURRENT MANUAL: Chronograph Settings | Retrograde | Split Time

Split Time

Press…

1. The upper push-button to start the chronograph.

2. The lower push-button to read the intermediary time.

3. Once again to continue (repeat the last two actions as many times as you wish to read the intermediary time while the chrono carries on).

4. The upper push-button to stop finally.

5. The lower push-button to reset.

PRINT THIS PAGE

CURRENT MANUAL: Chronograph Settings | Standard | Timing Mode

Timing Mode

Press…

1. The upper push-button to start the chronograph.

2. Once again to read the elapsed time.

3. The lower push-button to reset.

PRINT THIS PAGE

CURRENT MANUAL: Chronograph Settings | Chrono Automatic | Add Function

Add Function

Press…

1. The upper push-button to start.

2. Press the upper push-button to read the first time.

3. Press the upper push-button to restart the chronograph.

4. Press the upper push-button to read the additional time (repeat these two steps as many time as you wish).

5. Press the lower push-button to reset.

PRINT THIS PAGE

CURRENT MANUAL: Chronograph Settings | Chrono Automatic | Tachymeter

Tachymeter

Measure the speed Base 100 or 1000 m.

Press...

1. The upper push-button when an action starts.

2. Once again to stop after a distance of 100 or 1000 m. Read the speed indicated by the 60 seconds counter  on the tachymeter scale (km/h = kph).

3. The lower push-button to reset.

PRINT THIS PAGE

CURRENT MANUAL: Chronograph Settings | Retrograde | Add Function

Add Function

Press…

1. The upper push-button to start.

2. Press the upper push-button to read the first time.

3. Press the upper push-button to restart the chronograph.

4. Press the upper push-button to read the additional time (repeat these two steps as many time as you wish).

5. Press the lower push-button to reset.

PRINT THIS PAGE

CURRENT MANUAL: Time Settings | Touch/Fun

Time Settings

To set the time, pull crown to position 2. Turn slowly to correct minutes. Turn quickly to correct hours. After resetting has been completed, push the crown back.

 

PRINT THIS PAGE

CURRENT MANUAL: Readjustment | Chrono Medium

Readjustment

Adjusting the chronograph (e.g.: after battery change or a hard shock)

1. Pull the crown to position B.

2. Press the lower button to reach the position 12h00 with the hand of the minutes counter.

3. Pull the crown to the position C.

4. Press the upper button to reach the position 12h00 with the hand of the seconds counter.

5. Press the lower button to reach the position 12h00 with the hand of the 1/10 sec. counter.

6. Press the crown to position A.

PRINT THIS PAGE

CURRENT MANUAL: Time Settings | Swatch Touch

Time Settings

1. Touch 1 sec

2. Active Mode

3. Touch 1.5 sec for backlight

Timeout after 20 sec stays in last activated mode

For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover

4. Scroll to change function

5. Seconds

6. Hours

7. Symbols

8. Minutes

9. Chrono, alarm, timer are only visible when active

10. Touch 1.5 sec

11. Short touch

12. Touch 1.5 sec to confirm

13. Scroll left for - / Scroll right for +

PRINT THIS PAGE

CURRENT MANUAL: Day/Date Settings | Swatch Touch

Date Setting

1. Touch 1 sec

2. Active Mode

3. Touch 1.5 sec for backlight

Timeout after 20 sec stays in last activated mode

For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover.

4. Scroll to change function

5. Date Symbol

6. Month

7. Day

8. Year

9. Touch 1.5 sec

10. Short touch

11. Touch 1.5 sec to confirm

12. Scroll left for - / Scroll right for +

PRINT THIS PAGE

CURRENT MANUAL: Additional functions | Swatch Touch | Alarm

Alarm

1. Touch 1 sec

2. Active Mode

3. Touch 1.5 sec for backlight. Timeout after 20 sec stays in last activated mode.

For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover

4. Scroll to change function

5. Alarm Symbol

6. Hour

7. Alarm ON

8. Minutes

9. Touch to stop alarm

10. Alarm OFF

11. Alarm based on T1, Alarm remains off until reactivated

12. Touch 1.5 sec

13. Short touch

14. Touch 1.5 sec to confirm

15. Scroll left for - / Scroll right for +

PRINT THIS PAGE

CURRENT MANUAL: Chronograph Settings | Swatch Touch

Chronograph Settings

1. Touch 1 sec

2. Active Mode

3. Touch 1.5 sec for backlight

Timeout after 20 sec stays in last activated mode

For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover

4. Scroll to change function. Touch 1.5 sec to confirm.

5. Start

6. Stop

7. Restart

8. Stop

9. Touch 1.5 sec for reset

PRINT THIS PAGE

CURRENT MANUAL: Additional functions | Alarm | Alarm

TOUCH ALARM

SHOW ALARM TIME

1. Touch your Swatch.Hands move to show alarm time for approx. 4 secs.

STOP ALARM

2. Touch your Swatch to stop alarm.

Switch alarm on/off and set alarm time.

ALARM ON/OFF

3. Press crown and hands go to actual mode on or off.

…CHANGE ON/OFF

4. Press crown and hands go to actual mode on or off. Press crown again to change mode.

SHOW LAST ALARM

5. Pull crown to position 1 and the hands go to the last alarm time.

…SET NEW ALARM

6. To set a new alarm time, turn crown (turn slowly = minutes, turn quickly = hours).

GO

7. Then push crown back and hands turn back to time and alarm mode will be “on”.

ALARM DEMO

8. Press crown for 2 secs. to start alarm demo.

9. To stop press crown again. 

Important: When the hands do not show correctly ON-OFF (alarm mode), the Touch Alarm must be adjusted (e.g. after battery change or a hard knock).

 

 

 

PRINT THIS PAGE

CURRENT MANUAL: Additional functions | Swatch Touch | Timer

Timer

1. Touch 1 sec

2. Active Mode

3. Touch 1.5 sec for backlightTimeout after 20 sec stays in last activated mode.

For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover

4. Scroll to change function

5. Touch 1.5 sec

6. Short touch

7. Touch 1.5 sec to confirm

8. Scroll left for - / Scroll right for +

9. Start

10. Stop

11. Timer max. 99h 59'59"

 

PRINT THIS PAGE

CURRENT MANUAL: Additional functions | Swatch Touch | Beep

Swatch Touch Beep

1. Touch 1 sec

2. Active Mode

3. Touch 1.5 sec for backlight. Timeout after 20 sec stays in last activated mode

For an optimal use of the touch interface, wear the watch on your wrist or touch the battery cover

4. Scroll to change function. Touch 1.5 sec to confirm.

5. Beep ON

6. Beep OFF

7. Touch 1.5 sec to confirm.

PRINT THIS PAGE

CURRENT MANUAL: Battery Change | Swatch Touch

Battery Change

1. Battery Change

2. Battery ref: CR 1632, 16.00 X 3.20/3.00V

 

PRINT THIS PAGE

CURRENT MANUAL: Time Settings

test

test

PRINT THIS PAGE